@conference {146,
	title = {3D Mutual Localization with Anonymous Bearing Measurements},
	booktitle = {2012 IEEE Int. Conf. on Robotics and Automation},
	year = {2012},
	month = {05/2012},
	address = {St. Paul, MN},
	abstract = {We present a decentralized algorithm for estimating mutual 3-D poses in a group of mobile robots, such as a team of UAVs. Our algorithm uses bearing measurements reconstructed, e.g., by a visual sensor, and inertial measurements coming from the robot IMU. Since identification of a specific robot in a group would require visual tagging and may be cumbersome in practice, we simply assume that the bear- ing measurements are anonymous. The proposed localization method is a non-trivial extension of our previous algorithm for the 2-D case, and exhibits similar performance and robustness. An experimental validation of the algorithm has been performed using quadrotor UAVs.},
	keywords = {Distributed algorithms, Estimation, Localization, Localization of aerial robots, Multi-robot systems},
	author = {Marco Cognetti and Paolo Stegagno and Antonio Franchi and Giuseppe Oriolo and Heinrich H. B{\"u}lthoff}
}
@article {141,
	title = {Bilateral Teleoperation of Groups of Mobile Robots with Time-Varying Topology},
	journal = {IEEE Transaction on Robotics},
	volume = {28},
	year = {2012},
	month = {10/2012},
	pages = {1019	-1033},
	abstract = {In this paper, a novel decentralized control strategy for bilaterally teleoperating heterogeneous groups of mobile robots from different domains (aerial, ground, marine and under- water) is proposed. By using a decentralized control architecture, the group of robots, treated as the slave-side, is made able to navigate in a cluttered environment while avoiding obstacles, inter-robot collisions and following the human motion commands. Simultaneously, the human operator acting on the master side is provided with a suitable force feedback informative of the group response and of the interaction with the surrounding environment. Using passivity based techniques, we allow the behavior of the group to be as flexible as possible with arbitrary split and join events (e.g., due to inter-robot visibility/packet losses or specific task requirements) while guaranteeing the stability of the system. We provide a rigorous analysis of the system stability and steady-state characteristics, and validate performance through human/hardware-in-the-tloop simulations by considering a heterogeneous fleet of UAVs and UGVs as case study. Finally, we also provide an experimental validation with 4 quadrotor UAV},
	keywords = {Bilateral Shared Control of Mobile Robots, Decentralized control, Distributed algorithms, Force feedback, Haptics, Motion control of multiple robots, Multi-robot systems, Teleoperation},
	author = {Antonio Franchi and Cristian Secchi and Hyoung Il Son and Heinrich H. B{\"u}lthoff and Paolo Robuffo Giordano}
}
@article {35,
	title = {Modeling and Control of UAV Bearing-Formations with Bilateral High-Level Steering},
	journal = {The International Journal of Robotics Research, Special Issue on 3D Exploration, Mapping, and Surveillance},
	volume = {31},
	year = {2012},
	month = {10/2012},
	pages = {1504-1525},
	abstract = {In this paper we address the problem of controlling the motion of a group of UAVs bound to keep a formation defined in terms of only relative angles (i.e., a bearing-formation). This problem can naturally arise within the context of several multi-robot applications such as, e.g., exploration, coverage, and surveillance. First, we introduce and thoroughly analyze the concept and properties of bearing-formations, and provide a class of minimally linear sets of bearings sufficient to uniquely define such formations. We then propose a bearing-only formation controller requiring only bearing measurements, converging almost globally, and maintaining bounded inter-agent distances despite the lack of direct metric information. The controller still leaves the possibility to impose group motions tangent to the current bearing-formation. These can be either autonomously chosen by the robots because of any additional task (e.g., exploration), or exploited by an assisting human co-operator. For this latter {\textquoteleft}human-in-the-loop{\textquoteright} case, we propose a multi-master/multi-slave bilateral shared control system providing the co-operator with some suitable force cues informative of the UAV performance. The proposed theoretical framework is extensively validated by means of simulations and experiments with quadrotor UAVs equipped with onboard cameras. Practical limitations, e.g., limited field-of-view, are also considered.},
	keywords = {Bilateral Shared Control of Mobile Robots, Decentralized control, Force feedback, Formation control, Haptics, Motion control of multiple robots, Multi-robot systems, Teleoperation},
	author = {Antonio Franchi and Carlo Masone and Volker Grabe and Markus Ryll and Heinrich H. B{\"u}lthoff and Paolo Robuffo Giordano}
}
@conference {98,
	title = {Rigidity Maintenance Control for Multi-Robot Systems},
	booktitle = {2012 Robotics: Science and Systems Conference},
	year = {2012},
	month = {07/2012},
	address = {Sydney, Australia},
	abstract = {Rigidity of formations in multi-robot systems is important for formation control, localization, and sensor fusion. This work proposes a rigidity maintenance gradient controller for a multi-agent robot team. To develop such a controller, we first provide an alternative characterization of the rigidity matrix and use that to introduce the novel concept of the rigidity eigenvalue. We provide a necessary and sufficient condition relating the positivity of the rigidity eigenvalue to the rigidity of the formation. The rigidity maintenance controller is based on the gradient of the rigidity eigenvalue with respect to each robot position. This gradient has a naturally distributed structure, and is thus amenable to a distributed implementation. Additional requirements such as obstacle and inter-agent collision avoidance, as well as typical constraints such as limited sensing/communication ranges and line-of-sight occlusions, are also explicitly considered. Finally, we present a simulation with a group of seven quadrotor UAVs to demonstrate and validate the theoretical results.},
	keywords = {Decentralized control, Formation control, Motion control of multiple robots, Multi-robot systems, Rigidity mainenance},
	author = {Daniel Zelazo and Antonio Franchi and Frank Allg{\"o}wer and Heinrich H. B{\"u}lthoff and Paolo Robuffo Giordano}
}
@article {139,
	title = {Shared Control: Balancing Autonomy and Human Assistance with a Group of Quadrotor UAVs.},
	journal = {IEEE Robotics and Automation Magazine, Special Issue on Aerial Robotics and the Quadrotor Platform},
	volume = {19},
	year = {2012},
	month = {09/2012},
	pages = {57-68},
	abstract = {In this paper, we present a complete control framework and associated experimental testbed for the bilateral shared control of a group of quadrotor UAVs. This control architecture is applicable to any task and allows to integrate: i) a decentralized topological motion control (responsible for the mutual interactions in the UAV formation), ii) a human assistance module (allowing human intervention, whenever needed, on some aspects of the UAV group behavior), and iii) a force-feedback possibility (increasing the telepresence of the human assistants by providing suitable haptic cues informative of the UAV behavior). We will show, as worked-out case studies, how to specialize the topological motion controller to the relevant cases of constant, unconstrained and connected group topologies, and how to let a human operator intervening at the level of single UAVs or of the whole group dynamics. A detailed description of the experimental testbed is also provided with emphasis on the quadrotor UAV hardware and software architectures. Finally, the versatility of the proposed framework is demonstrated by means of experiments with real UAVs. Although quadrotors are used as actual robotic platforms, the proposed framework can be straightforwardly extended to many different kinds of UAVs with similar motion characteristics.},
	keywords = {Bilateral Shared Control of Mobile Robots, Decentralized control, Force feedback, Formation control, Haptics, Middleware for robotics, Motion control of multiple robots, Multi-robot systems, UAV hardware platforms},
	author = {Antonio Franchi and Cristian Secchi and Markus Ryll and Heinrich H. B{\"u}lthoff and Paolo Robuffo Giordano}
}
